![\"\"](\"http:\/\/www.grupoiraco.com\/wp-content\/uploads\/2017\/02\/p_adherido.jpg\")
<\/td>\n![\"\"](\"http:\/\/www.grupoiraco.com\/wp-content\/uploads\/2017\/02\/p_rapido.jpg\")
<\/td>\n![\"\"](\"http:\/\/www.grupoiraco.com\/wp-content\/uploads\/2017\/02\/p_impermeable.jpg\")
<\/td>\n![\"\"](\"http:\/\/www.grupoiraco.com\/wp-content\/uploads\/2017\/02\/p_intemperie.jpg\")
<\/td>\n![\"\"](\"http:\/\/www.grupoiraco.com\/wp-content\/uploads\/2017\/02\/p_pendiente_0.jpg\")
<\/td>\n![\"\"](\"http:\/\/www.grupoiraco.com\/wp-content\/uploads\/2017\/02\/p_ajardinado.jpg\")
<\/td>\n![\"\"](\"http:\/\/www.grupoiraco.com\/wp-content\/uploads\/2017\/02\/p_flotante.jpg\")
<\/td>\n<\/tr>\nFULL ADHERED<\/h6>\n<\/td>\n\nFAST SETTING<\/h6>\n<\/td>\n\n100% WATERPROOF<\/h6>\n<\/td>\n\nU.V. RESISTANT<\/h6>\n<\/td>\n\nZERO SLOPE<\/h6>\n<\/td>\n\nGREEN ROOF<\/h6>\n<\/td>\n\nFLOATING<\/h6>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
<\/p>\n
<\/p>\n
<\/div>\n[\/vc_column_text][vc_separator][ultimate_exp_section title=”+ INFORMATION”][vc_column_text css=”.vc_custom_1532762481278{background-color: #ffffff !important;}”]Bituminous sheet<\/strong><\/p>\n\nPrefabricated sheets made up of one or several layers coated with mastic asphalt, encapsulated (P.AND. film), and non-stick on both sides. This can occasionally be supplied with weather-proof protection on one side.<\/p>\n
\n <\/p>\n
Mastic asphalt<\/strong><\/p>\nBitumen derived from the distillation of petroleum, modified with the addition of polymers (polymeric) or other processes (Oxyasphalt).<\/p>\n
\n <\/p>\n
Polymeric: APP \u2013 SBS<\/strong><\/p>\n\n- APP:<\/strong> Polymer (Atactic Polypropylene) which is added to bitumen to obtain Plastomeric sheets.<\/li>\n<\/ul>\n
PROPERTIES<\/strong>:<\/p>\n\n- High softening point: allows application on hot days.<\/li>\n
- Highly resistant to atmospheric agents: provides maximum guarantee of durability and strength.<\/li>\n
- Good flexibility at low temperatures. (-15o<\/sup> C).<\/li>\n<\/ul>\n
SBS<\/strong>: Polymer (Styrene Butadiene Styrene) which is added to the bitumen to obtain Elastomeric sheets.<\/p>\nPROPERTIES:<\/p>\n
\n- Excellent flexibility at low temperatures (-20o<\/sup> C).<\/li>\n
- Excellent adherence to most surfaces used in construction.<\/li>\n<\/ul>\n
CONSIDERATIONS<\/strong>:<\/p>\n\n- Normally APP or SBS polymeric bitumen sheets may be used indistinctly.<\/li>\n
- In hot climates the APP sheets provide easier application.<\/li>\n
- The penetration of SBS at 25o <\/sup>C is 40 mm, while that of APP is 30 mm.<\/li>\n
- Using sheets SBS sheets on roofs with oscillating movement (metallic roofs) or on roofs where adhesion to the surface is a priority (parking roofs) is recommended.<\/li>\n<\/ul>\n
Oxidized bitumen (Oxyasphalt)<\/strong><\/p>\nBitumen derived from the distillation of petroleum which has hardened and acquired reduced thermal susceptibility, through blowing with hot air with or without added catalysts.<\/p>\n
\n <\/p>\n
Armour<\/strong><\/p>\nMaterial incorporated into or onto sheets with the purpose of providing support to the waterproofing material and added mechanical characteristics such as:<\/p>\n
\n- Resistance to Puncturing.<\/li>\n
- Dimensional Stability.<\/li>\n
- Resistance to Tearing.<\/li>\n
- Elongation<\/li>\n<\/ul>\n\n
<\/p>\n
\n <\/p>\n
SINGLE SHEET (SINGLE LAYER):<\/strong><\/p>\nSheet membrane WATERPROOFING SYSTEMS based on the placement of a single bituminous polymer sheet (LBM).<\/p>\n
With a minimum weight of:<\/p>\n
\n- \u00a04kg\/m2 in unprotected solutions<\/li>\n
- \u00a05 kg\/m2 in auto-protected solutions<\/li>\n<\/ul>\n
Requirements in accordance with the Spanish CTE technical construction code.<\/p>\n
Single sheet systems, depending on their composition (mastic asphalt), armour or method of application, can be subdivided into the following systems:<\/p>\n
\n- Floating: 0,1,2-I.ILB<\/li>\n
- Adherent: 3,4-ILB<\/li>\n
- Self protecting: 5,6,7,8-ILB<\/li>\n
- Anti-root: 9,10,11,12-ILB<\/li>\n
- Mechanically fixed: 13-ILB<\/li>\n
- Self adhesive: 14-ILB<\/li>\n<\/ul>\n<\/div>\n\n
\n <\/p>\n
DOUBLE SHEET (DOUBLE COAT):<\/strong><\/p>\nLaminate WATERPROOFING SYSTEMS based on placement of a combination of two laminar bituminous sheets (LBM \/ LA \/ OXI), with a composition of not less than 4KG\/m2 of polymeric mastic asphalt (LBM), per m2 (completed with LA \/ OXI), in accordance with CTE regulations.<\/p>\n
The double sheet systems, depending on their combination, composition (mastic asphalt), armour or method of application, can be subdivided into the following systems:<\/p>\n
\n- Floating: 15,16-ILB<\/li>\n
- Adhesive: 17,18-ILB<\/li>\n
- Self protecting: 19,20,21,22-ILB<\/li>\n
- Anti-root: 23,24,25,26,27,28,29,30-ILB<\/li>\n
- Mechanically fixed: 31-ILB<\/li>\n<\/ul>\n
<\/p>\n<\/div>\n<\/div>\n
[\/vc_column_text][\/ultimate_exp_section][vc_empty_space height=”50px”]
<\/span>STAND OUT PROJECTS COMPLETED USING THESE SYSTEMS<\/span><\/div><\/div>[vc_empty_space][vc_media_grid element_width=”2″ grid_id=”vc_gid:1532767129573-c99378b3-f801-10″ include=”817,818,819,820,821,822,823,824,825,826,827,828,829,830,831,832,833,834,835,836″][\/vc_column][vc_column width=”1\/4″]\t\t[vc_column_text]- GARDEN AREA SYSTEMS<\/a><\/li>\n
- LAMINATED WATERPROOFING SYSTEMS<\/a>\n
\n\t- LAMINATED BITUMINOUS SYSTEMS (APP \u2013 SBS)<\/a><\/li>\n\t
- LAMINATED SYNTHETIC SYSTEMS<\/a><\/li>\n<\/ul>\n<\/li>\n
- CONTINUOUS WATERPROOFING SYSTEMS<\/a>\n
\n\t- POLYUREA<\/a><\/li>\n\t
- POLYURETHANES \u2013 PU<\/a><\/li>\n\t
- MODIFIED BITUMENS<\/a><\/li>\n<\/ul>\n<\/li>\n
- CEMENT BASED WATERPROOFING SYSTEMS<\/a>\n
\n\t- FLEXIBLE SYSTEMS<\/a><\/li>\n\t
- CRYSTALLIZING SYSTEMS<\/a><\/li>\n<\/ul>\n<\/li>\n
- INJECTED SYSTEMS<\/a>\n
\n\t- CONSOLIDANTS<\/a><\/li>\n\t
- LEAK SEALANTS<\/a><\/li>\n<\/ul>\n<\/li>\n
- PROTECTIVE COATINGS AND PAINTS<\/a>\n
\n\t- BITUMINOUS EMULSIONS<\/a><\/li>\n\t
- BITUMINOUS MORTARS<\/a><\/li>\n\t
- EPOXY TARS<\/a><\/li>\n\t
- PAINTS<\/a><\/li>\n<\/ul>\n<\/li>\n<\/ul><\/div><\/strong>[\/vc_column_text]\t\t<\/div><\/div>[\/vc_column][\/vc_row]<\/p>\n","protected":false},"excerpt":{"rendered":"
[vc_row type=”vc_default” full_width=”stretch_row” bg_type=”image” parallax_style=”vcpb-default” bg_image_new=”id^438|url^http:\/\/www.grupoiraco.com\/wp-content\/uploads\/2017\/02\/gotass.jpg|caption^null|alt^null|title^gotass|description^null” bg_image_repeat=”no-repeat” css=”.vc_custom_1486576121801{margin-top: -50px !important;}”][vc_column][vc_empty_space height=”250px”][\/vc_column][\/vc_row][vc_row][vc_column][\/vc_column][\/vc_row][vc_row][vc_column width=”3\/4″][vc_single_image image=”1260″ img_size=”full”][vc_column_text] LAMINATED BITUMINOUS SYSTEMS (APP \u2013 SBS) WATERPROOFING SYSTEMS based on the placement of a combination of bituminous sheets, which depending on their composition, armour, finish or… [+]<\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[107],"tags":[],"_links":{"self":[{"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/posts\/3452"}],"collection":[{"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/comments?post=3452"}],"version-history":[{"count":3,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/posts\/3452\/revisions"}],"predecessor-version":[{"id":3648,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/posts\/3452\/revisions\/3648"}],"wp:attachment":[{"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/media?parent=3452"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/categories?post=3452"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/tags?post=3452"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
FAST SETTING<\/h6>\n<\/td>\n\n100% WATERPROOF<\/h6>\n<\/td>\n\nU.V. RESISTANT<\/h6>\n<\/td>\n\nZERO SLOPE<\/h6>\n<\/td>\n\nGREEN ROOF<\/h6>\n<\/td>\n\nFLOATING<\/h6>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
<\/p>\n
<\/p>\n
<\/div>\n[\/vc_column_text][vc_separator][ultimate_exp_section title=”+ INFORMATION”][vc_column_text css=”.vc_custom_1532762481278{background-color: #ffffff !important;}”]Bituminous sheet<\/strong><\/p>\n\nPrefabricated sheets made up of one or several layers coated with mastic asphalt, encapsulated (P.AND. film), and non-stick on both sides. This can occasionally be supplied with weather-proof protection on one side.<\/p>\n
\n <\/p>\n
Mastic asphalt<\/strong><\/p>\nBitumen derived from the distillation of petroleum, modified with the addition of polymers (polymeric) or other processes (Oxyasphalt).<\/p>\n
\n <\/p>\n
Polymeric: APP \u2013 SBS<\/strong><\/p>\n\n- APP:<\/strong> Polymer (Atactic Polypropylene) which is added to bitumen to obtain Plastomeric sheets.<\/li>\n<\/ul>\n
PROPERTIES<\/strong>:<\/p>\n\n- High softening point: allows application on hot days.<\/li>\n
- Highly resistant to atmospheric agents: provides maximum guarantee of durability and strength.<\/li>\n
- Good flexibility at low temperatures. (-15o<\/sup> C).<\/li>\n<\/ul>\n
SBS<\/strong>: Polymer (Styrene Butadiene Styrene) which is added to the bitumen to obtain Elastomeric sheets.<\/p>\nPROPERTIES:<\/p>\n
\n- Excellent flexibility at low temperatures (-20o<\/sup> C).<\/li>\n
- Excellent adherence to most surfaces used in construction.<\/li>\n<\/ul>\n
CONSIDERATIONS<\/strong>:<\/p>\n\n- Normally APP or SBS polymeric bitumen sheets may be used indistinctly.<\/li>\n
- In hot climates the APP sheets provide easier application.<\/li>\n
- The penetration of SBS at 25o <\/sup>C is 40 mm, while that of APP is 30 mm.<\/li>\n
- Using sheets SBS sheets on roofs with oscillating movement (metallic roofs) or on roofs where adhesion to the surface is a priority (parking roofs) is recommended.<\/li>\n<\/ul>\n
Oxidized bitumen (Oxyasphalt)<\/strong><\/p>\nBitumen derived from the distillation of petroleum which has hardened and acquired reduced thermal susceptibility, through blowing with hot air with or without added catalysts.<\/p>\n
\n <\/p>\n
Armour<\/strong><\/p>\nMaterial incorporated into or onto sheets with the purpose of providing support to the waterproofing material and added mechanical characteristics such as:<\/p>\n
\n- Resistance to Puncturing.<\/li>\n
- Dimensional Stability.<\/li>\n
- Resistance to Tearing.<\/li>\n
- Elongation<\/li>\n<\/ul>\n\n
<\/p>\n
\n <\/p>\n
SINGLE SHEET (SINGLE LAYER):<\/strong><\/p>\nSheet membrane WATERPROOFING SYSTEMS based on the placement of a single bituminous polymer sheet (LBM).<\/p>\n
With a minimum weight of:<\/p>\n
\n- \u00a04kg\/m2 in unprotected solutions<\/li>\n
- \u00a05 kg\/m2 in auto-protected solutions<\/li>\n<\/ul>\n
Requirements in accordance with the Spanish CTE technical construction code.<\/p>\n
Single sheet systems, depending on their composition (mastic asphalt), armour or method of application, can be subdivided into the following systems:<\/p>\n
\n- Floating: 0,1,2-I.ILB<\/li>\n
- Adherent: 3,4-ILB<\/li>\n
- Self protecting: 5,6,7,8-ILB<\/li>\n
- Anti-root: 9,10,11,12-ILB<\/li>\n
- Mechanically fixed: 13-ILB<\/li>\n
- Self adhesive: 14-ILB<\/li>\n<\/ul>\n<\/div>\n\n
\n <\/p>\n
DOUBLE SHEET (DOUBLE COAT):<\/strong><\/p>\nLaminate WATERPROOFING SYSTEMS based on placement of a combination of two laminar bituminous sheets (LBM \/ LA \/ OXI), with a composition of not less than 4KG\/m2 of polymeric mastic asphalt (LBM), per m2 (completed with LA \/ OXI), in accordance with CTE regulations.<\/p>\n
The double sheet systems, depending on their combination, composition (mastic asphalt), armour or method of application, can be subdivided into the following systems:<\/p>\n
\n- Floating: 15,16-ILB<\/li>\n
- Adhesive: 17,18-ILB<\/li>\n
- Self protecting: 19,20,21,22-ILB<\/li>\n
- Anti-root: 23,24,25,26,27,28,29,30-ILB<\/li>\n
- Mechanically fixed: 31-ILB<\/li>\n<\/ul>\n
<\/p>\n<\/div>\n<\/div>\n
[\/vc_column_text][\/ultimate_exp_section][vc_empty_space height=”50px”]
<\/span>STAND OUT PROJECTS COMPLETED USING THESE SYSTEMS<\/span><\/div><\/div>[vc_empty_space][vc_media_grid element_width=”2″ grid_id=”vc_gid:1532767129573-c99378b3-f801-10″ include=”817,818,819,820,821,822,823,824,825,826,827,828,829,830,831,832,833,834,835,836″][\/vc_column][vc_column width=”1\/4″]\t\t[vc_column_text]- GARDEN AREA SYSTEMS<\/a><\/li>\n
- LAMINATED WATERPROOFING SYSTEMS<\/a>\n
\n\t- LAMINATED BITUMINOUS SYSTEMS (APP \u2013 SBS)<\/a><\/li>\n\t
- LAMINATED SYNTHETIC SYSTEMS<\/a><\/li>\n<\/ul>\n<\/li>\n
- CONTINUOUS WATERPROOFING SYSTEMS<\/a>\n
\n\t- POLYUREA<\/a><\/li>\n\t
- POLYURETHANES \u2013 PU<\/a><\/li>\n\t
- MODIFIED BITUMENS<\/a><\/li>\n<\/ul>\n<\/li>\n
- CEMENT BASED WATERPROOFING SYSTEMS<\/a>\n
\n\t- FLEXIBLE SYSTEMS<\/a><\/li>\n\t
- CRYSTALLIZING SYSTEMS<\/a><\/li>\n<\/ul>\n<\/li>\n
- INJECTED SYSTEMS<\/a>\n
\n\t- CONSOLIDANTS<\/a><\/li>\n\t
- LEAK SEALANTS<\/a><\/li>\n<\/ul>\n<\/li>\n
- PROTECTIVE COATINGS AND PAINTS<\/a>\n
\n\t- BITUMINOUS EMULSIONS<\/a><\/li>\n\t
- BITUMINOUS MORTARS<\/a><\/li>\n\t
- EPOXY TARS<\/a><\/li>\n\t
- PAINTS<\/a><\/li>\n<\/ul>\n<\/li>\n<\/ul><\/div><\/strong>[\/vc_column_text]\t\t<\/div><\/div>[\/vc_column][\/vc_row]<\/p>\n","protected":false},"excerpt":{"rendered":"
[vc_row type=”vc_default” full_width=”stretch_row” bg_type=”image” parallax_style=”vcpb-default” bg_image_new=”id^438|url^http:\/\/www.grupoiraco.com\/wp-content\/uploads\/2017\/02\/gotass.jpg|caption^null|alt^null|title^gotass|description^null” bg_image_repeat=”no-repeat” css=”.vc_custom_1486576121801{margin-top: -50px !important;}”][vc_column][vc_empty_space height=”250px”][\/vc_column][\/vc_row][vc_row][vc_column][\/vc_column][\/vc_row][vc_row][vc_column width=”3\/4″][vc_single_image image=”1260″ img_size=”full”][vc_column_text] LAMINATED BITUMINOUS SYSTEMS (APP \u2013 SBS) WATERPROOFING SYSTEMS based on the placement of a combination of bituminous sheets, which depending on their composition, armour, finish or… [+]<\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[107],"tags":[],"_links":{"self":[{"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/posts\/3452"}],"collection":[{"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/comments?post=3452"}],"version-history":[{"count":3,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/posts\/3452\/revisions"}],"predecessor-version":[{"id":3648,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/posts\/3452\/revisions\/3648"}],"wp:attachment":[{"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/media?parent=3452"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/categories?post=3452"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/tags?post=3452"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
100% WATERPROOF<\/h6>\n<\/td>\n\nU.V. RESISTANT<\/h6>\n<\/td>\n\nZERO SLOPE<\/h6>\n<\/td>\n\nGREEN ROOF<\/h6>\n<\/td>\n\nFLOATING<\/h6>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
<\/p>\n
<\/p>\n
<\/div>\n[\/vc_column_text][vc_separator][ultimate_exp_section title=”+ INFORMATION”][vc_column_text css=”.vc_custom_1532762481278{background-color: #ffffff !important;}”]Bituminous sheet<\/strong><\/p>\n\nPrefabricated sheets made up of one or several layers coated with mastic asphalt, encapsulated (P.AND. film), and non-stick on both sides. This can occasionally be supplied with weather-proof protection on one side.<\/p>\n
\n <\/p>\n
Mastic asphalt<\/strong><\/p>\nBitumen derived from the distillation of petroleum, modified with the addition of polymers (polymeric) or other processes (Oxyasphalt).<\/p>\n
\n <\/p>\n
Polymeric: APP \u2013 SBS<\/strong><\/p>\n\n- APP:<\/strong> Polymer (Atactic Polypropylene) which is added to bitumen to obtain Plastomeric sheets.<\/li>\n<\/ul>\n
PROPERTIES<\/strong>:<\/p>\n\n- High softening point: allows application on hot days.<\/li>\n
- Highly resistant to atmospheric agents: provides maximum guarantee of durability and strength.<\/li>\n
- Good flexibility at low temperatures. (-15o<\/sup> C).<\/li>\n<\/ul>\n
SBS<\/strong>: Polymer (Styrene Butadiene Styrene) which is added to the bitumen to obtain Elastomeric sheets.<\/p>\nPROPERTIES:<\/p>\n
\n- Excellent flexibility at low temperatures (-20o<\/sup> C).<\/li>\n
- Excellent adherence to most surfaces used in construction.<\/li>\n<\/ul>\n
CONSIDERATIONS<\/strong>:<\/p>\n\n- Normally APP or SBS polymeric bitumen sheets may be used indistinctly.<\/li>\n
- In hot climates the APP sheets provide easier application.<\/li>\n
- The penetration of SBS at 25o <\/sup>C is 40 mm, while that of APP is 30 mm.<\/li>\n
- Using sheets SBS sheets on roofs with oscillating movement (metallic roofs) or on roofs where adhesion to the surface is a priority (parking roofs) is recommended.<\/li>\n<\/ul>\n
Oxidized bitumen (Oxyasphalt)<\/strong><\/p>\nBitumen derived from the distillation of petroleum which has hardened and acquired reduced thermal susceptibility, through blowing with hot air with or without added catalysts.<\/p>\n
\n <\/p>\n
Armour<\/strong><\/p>\nMaterial incorporated into or onto sheets with the purpose of providing support to the waterproofing material and added mechanical characteristics such as:<\/p>\n
\n- Resistance to Puncturing.<\/li>\n
- Dimensional Stability.<\/li>\n
- Resistance to Tearing.<\/li>\n
- Elongation<\/li>\n<\/ul>\n\n
<\/p>\n
\n <\/p>\n
SINGLE SHEET (SINGLE LAYER):<\/strong><\/p>\nSheet membrane WATERPROOFING SYSTEMS based on the placement of a single bituminous polymer sheet (LBM).<\/p>\n
With a minimum weight of:<\/p>\n
\n- \u00a04kg\/m2 in unprotected solutions<\/li>\n
- \u00a05 kg\/m2 in auto-protected solutions<\/li>\n<\/ul>\n
Requirements in accordance with the Spanish CTE technical construction code.<\/p>\n
Single sheet systems, depending on their composition (mastic asphalt), armour or method of application, can be subdivided into the following systems:<\/p>\n
\n- Floating: 0,1,2-I.ILB<\/li>\n
- Adherent: 3,4-ILB<\/li>\n
- Self protecting: 5,6,7,8-ILB<\/li>\n
- Anti-root: 9,10,11,12-ILB<\/li>\n
- Mechanically fixed: 13-ILB<\/li>\n
- Self adhesive: 14-ILB<\/li>\n<\/ul>\n<\/div>\n\n
\n <\/p>\n
DOUBLE SHEET (DOUBLE COAT):<\/strong><\/p>\nLaminate WATERPROOFING SYSTEMS based on placement of a combination of two laminar bituminous sheets (LBM \/ LA \/ OXI), with a composition of not less than 4KG\/m2 of polymeric mastic asphalt (LBM), per m2 (completed with LA \/ OXI), in accordance with CTE regulations.<\/p>\n
The double sheet systems, depending on their combination, composition (mastic asphalt), armour or method of application, can be subdivided into the following systems:<\/p>\n
\n- Floating: 15,16-ILB<\/li>\n
- Adhesive: 17,18-ILB<\/li>\n
- Self protecting: 19,20,21,22-ILB<\/li>\n
- Anti-root: 23,24,25,26,27,28,29,30-ILB<\/li>\n
- Mechanically fixed: 31-ILB<\/li>\n<\/ul>\n
<\/p>\n<\/div>\n<\/div>\n
[\/vc_column_text][\/ultimate_exp_section][vc_empty_space height=”50px”]
<\/span>STAND OUT PROJECTS COMPLETED USING THESE SYSTEMS<\/span><\/div><\/div>[vc_empty_space][vc_media_grid element_width=”2″ grid_id=”vc_gid:1532767129573-c99378b3-f801-10″ include=”817,818,819,820,821,822,823,824,825,826,827,828,829,830,831,832,833,834,835,836″][\/vc_column][vc_column width=”1\/4″]\t\t[vc_column_text]- GARDEN AREA SYSTEMS<\/a><\/li>\n
- LAMINATED WATERPROOFING SYSTEMS<\/a>\n
\n\t- LAMINATED BITUMINOUS SYSTEMS (APP \u2013 SBS)<\/a><\/li>\n\t
- LAMINATED SYNTHETIC SYSTEMS<\/a><\/li>\n<\/ul>\n<\/li>\n
- CONTINUOUS WATERPROOFING SYSTEMS<\/a>\n
\n\t- POLYUREA<\/a><\/li>\n\t
- POLYURETHANES \u2013 PU<\/a><\/li>\n\t
- MODIFIED BITUMENS<\/a><\/li>\n<\/ul>\n<\/li>\n
- CEMENT BASED WATERPROOFING SYSTEMS<\/a>\n
\n\t- FLEXIBLE SYSTEMS<\/a><\/li>\n\t
- CRYSTALLIZING SYSTEMS<\/a><\/li>\n<\/ul>\n<\/li>\n
- INJECTED SYSTEMS<\/a>\n
\n\t- CONSOLIDANTS<\/a><\/li>\n\t
- LEAK SEALANTS<\/a><\/li>\n<\/ul>\n<\/li>\n
- PROTECTIVE COATINGS AND PAINTS<\/a>\n
\n\t- BITUMINOUS EMULSIONS<\/a><\/li>\n\t
- BITUMINOUS MORTARS<\/a><\/li>\n\t
- EPOXY TARS<\/a><\/li>\n\t
- PAINTS<\/a><\/li>\n<\/ul>\n<\/li>\n<\/ul><\/div><\/strong>[\/vc_column_text]\t\t<\/div><\/div>[\/vc_column][\/vc_row]<\/p>\n","protected":false},"excerpt":{"rendered":"
[vc_row type=”vc_default” full_width=”stretch_row” bg_type=”image” parallax_style=”vcpb-default” bg_image_new=”id^438|url^http:\/\/www.grupoiraco.com\/wp-content\/uploads\/2017\/02\/gotass.jpg|caption^null|alt^null|title^gotass|description^null” bg_image_repeat=”no-repeat” css=”.vc_custom_1486576121801{margin-top: -50px !important;}”][vc_column][vc_empty_space height=”250px”][\/vc_column][\/vc_row][vc_row][vc_column][\/vc_column][\/vc_row][vc_row][vc_column width=”3\/4″][vc_single_image image=”1260″ img_size=”full”][vc_column_text] LAMINATED BITUMINOUS SYSTEMS (APP \u2013 SBS) WATERPROOFING SYSTEMS based on the placement of a combination of bituminous sheets, which depending on their composition, armour, finish or… [+]<\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[107],"tags":[],"_links":{"self":[{"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/posts\/3452"}],"collection":[{"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/comments?post=3452"}],"version-history":[{"count":3,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/posts\/3452\/revisions"}],"predecessor-version":[{"id":3648,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/posts\/3452\/revisions\/3648"}],"wp:attachment":[{"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/media?parent=3452"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/categories?post=3452"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/tags?post=3452"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
U.V. RESISTANT<\/h6>\n<\/td>\n\nZERO SLOPE<\/h6>\n<\/td>\n\nGREEN ROOF<\/h6>\n<\/td>\n\nFLOATING<\/h6>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
<\/p>\n
<\/p>\n
<\/div>\n[\/vc_column_text][vc_separator][ultimate_exp_section title=”+ INFORMATION”][vc_column_text css=”.vc_custom_1532762481278{background-color: #ffffff !important;}”]Bituminous sheet<\/strong><\/p>\n\nPrefabricated sheets made up of one or several layers coated with mastic asphalt, encapsulated (P.AND. film), and non-stick on both sides. This can occasionally be supplied with weather-proof protection on one side.<\/p>\n
\n <\/p>\n
Mastic asphalt<\/strong><\/p>\nBitumen derived from the distillation of petroleum, modified with the addition of polymers (polymeric) or other processes (Oxyasphalt).<\/p>\n
\n <\/p>\n
Polymeric: APP \u2013 SBS<\/strong><\/p>\n\n- APP:<\/strong> Polymer (Atactic Polypropylene) which is added to bitumen to obtain Plastomeric sheets.<\/li>\n<\/ul>\n
PROPERTIES<\/strong>:<\/p>\n\n- High softening point: allows application on hot days.<\/li>\n
- Highly resistant to atmospheric agents: provides maximum guarantee of durability and strength.<\/li>\n
- Good flexibility at low temperatures. (-15o<\/sup> C).<\/li>\n<\/ul>\n
SBS<\/strong>: Polymer (Styrene Butadiene Styrene) which is added to the bitumen to obtain Elastomeric sheets.<\/p>\nPROPERTIES:<\/p>\n
\n- Excellent flexibility at low temperatures (-20o<\/sup> C).<\/li>\n
- Excellent adherence to most surfaces used in construction.<\/li>\n<\/ul>\n
CONSIDERATIONS<\/strong>:<\/p>\n\n- Normally APP or SBS polymeric bitumen sheets may be used indistinctly.<\/li>\n
- In hot climates the APP sheets provide easier application.<\/li>\n
- The penetration of SBS at 25o <\/sup>C is 40 mm, while that of APP is 30 mm.<\/li>\n
- Using sheets SBS sheets on roofs with oscillating movement (metallic roofs) or on roofs where adhesion to the surface is a priority (parking roofs) is recommended.<\/li>\n<\/ul>\n
Oxidized bitumen (Oxyasphalt)<\/strong><\/p>\nBitumen derived from the distillation of petroleum which has hardened and acquired reduced thermal susceptibility, through blowing with hot air with or without added catalysts.<\/p>\n
\n <\/p>\n
Armour<\/strong><\/p>\nMaterial incorporated into or onto sheets with the purpose of providing support to the waterproofing material and added mechanical characteristics such as:<\/p>\n
\n- Resistance to Puncturing.<\/li>\n
- Dimensional Stability.<\/li>\n
- Resistance to Tearing.<\/li>\n
- Elongation<\/li>\n<\/ul>\n\n
<\/p>\n
\n <\/p>\n
SINGLE SHEET (SINGLE LAYER):<\/strong><\/p>\nSheet membrane WATERPROOFING SYSTEMS based on the placement of a single bituminous polymer sheet (LBM).<\/p>\n
With a minimum weight of:<\/p>\n
\n- \u00a04kg\/m2 in unprotected solutions<\/li>\n
- \u00a05 kg\/m2 in auto-protected solutions<\/li>\n<\/ul>\n
Requirements in accordance with the Spanish CTE technical construction code.<\/p>\n
Single sheet systems, depending on their composition (mastic asphalt), armour or method of application, can be subdivided into the following systems:<\/p>\n
\n- Floating: 0,1,2-I.ILB<\/li>\n
- Adherent: 3,4-ILB<\/li>\n
- Self protecting: 5,6,7,8-ILB<\/li>\n
- Anti-root: 9,10,11,12-ILB<\/li>\n
- Mechanically fixed: 13-ILB<\/li>\n
- Self adhesive: 14-ILB<\/li>\n<\/ul>\n<\/div>\n\n
\n <\/p>\n
DOUBLE SHEET (DOUBLE COAT):<\/strong><\/p>\nLaminate WATERPROOFING SYSTEMS based on placement of a combination of two laminar bituminous sheets (LBM \/ LA \/ OXI), with a composition of not less than 4KG\/m2 of polymeric mastic asphalt (LBM), per m2 (completed with LA \/ OXI), in accordance with CTE regulations.<\/p>\n
The double sheet systems, depending on their combination, composition (mastic asphalt), armour or method of application, can be subdivided into the following systems:<\/p>\n
\n- Floating: 15,16-ILB<\/li>\n
- Adhesive: 17,18-ILB<\/li>\n
- Self protecting: 19,20,21,22-ILB<\/li>\n
- Anti-root: 23,24,25,26,27,28,29,30-ILB<\/li>\n
- Mechanically fixed: 31-ILB<\/li>\n<\/ul>\n
<\/p>\n<\/div>\n<\/div>\n
[\/vc_column_text][\/ultimate_exp_section][vc_empty_space height=”50px”]
<\/span>STAND OUT PROJECTS COMPLETED USING THESE SYSTEMS<\/span><\/div><\/div>[vc_empty_space][vc_media_grid element_width=”2″ grid_id=”vc_gid:1532767129573-c99378b3-f801-10″ include=”817,818,819,820,821,822,823,824,825,826,827,828,829,830,831,832,833,834,835,836″][\/vc_column][vc_column width=”1\/4″]\t\t[vc_column_text]- GARDEN AREA SYSTEMS<\/a><\/li>\n
- LAMINATED WATERPROOFING SYSTEMS<\/a>\n
\n\t- LAMINATED BITUMINOUS SYSTEMS (APP \u2013 SBS)<\/a><\/li>\n\t
- LAMINATED SYNTHETIC SYSTEMS<\/a><\/li>\n<\/ul>\n<\/li>\n
- CONTINUOUS WATERPROOFING SYSTEMS<\/a>\n
\n\t- POLYUREA<\/a><\/li>\n\t
- POLYURETHANES \u2013 PU<\/a><\/li>\n\t
- MODIFIED BITUMENS<\/a><\/li>\n<\/ul>\n<\/li>\n
- CEMENT BASED WATERPROOFING SYSTEMS<\/a>\n
\n\t- FLEXIBLE SYSTEMS<\/a><\/li>\n\t
- CRYSTALLIZING SYSTEMS<\/a><\/li>\n<\/ul>\n<\/li>\n
- INJECTED SYSTEMS<\/a>\n
\n\t- CONSOLIDANTS<\/a><\/li>\n\t
- LEAK SEALANTS<\/a><\/li>\n<\/ul>\n<\/li>\n
- PROTECTIVE COATINGS AND PAINTS<\/a>\n
\n\t- BITUMINOUS EMULSIONS<\/a><\/li>\n\t
- BITUMINOUS MORTARS<\/a><\/li>\n\t
- EPOXY TARS<\/a><\/li>\n\t
- PAINTS<\/a><\/li>\n<\/ul>\n<\/li>\n<\/ul><\/div><\/strong>[\/vc_column_text]\t\t<\/div><\/div>[\/vc_column][\/vc_row]<\/p>\n","protected":false},"excerpt":{"rendered":"
[vc_row type=”vc_default” full_width=”stretch_row” bg_type=”image” parallax_style=”vcpb-default” bg_image_new=”id^438|url^http:\/\/www.grupoiraco.com\/wp-content\/uploads\/2017\/02\/gotass.jpg|caption^null|alt^null|title^gotass|description^null” bg_image_repeat=”no-repeat” css=”.vc_custom_1486576121801{margin-top: -50px !important;}”][vc_column][vc_empty_space height=”250px”][\/vc_column][\/vc_row][vc_row][vc_column][\/vc_column][\/vc_row][vc_row][vc_column width=”3\/4″][vc_single_image image=”1260″ img_size=”full”][vc_column_text] LAMINATED BITUMINOUS SYSTEMS (APP \u2013 SBS) WATERPROOFING SYSTEMS based on the placement of a combination of bituminous sheets, which depending on their composition, armour, finish or… [+]<\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[107],"tags":[],"_links":{"self":[{"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/posts\/3452"}],"collection":[{"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/comments?post=3452"}],"version-history":[{"count":3,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/posts\/3452\/revisions"}],"predecessor-version":[{"id":3648,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/posts\/3452\/revisions\/3648"}],"wp:attachment":[{"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/media?parent=3452"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/categories?post=3452"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/tags?post=3452"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
ZERO SLOPE<\/h6>\n<\/td>\n\nGREEN ROOF<\/h6>\n<\/td>\n\nFLOATING<\/h6>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
<\/p>\n
<\/p>\n
<\/div>\n[\/vc_column_text][vc_separator][ultimate_exp_section title=”+ INFORMATION”][vc_column_text css=”.vc_custom_1532762481278{background-color: #ffffff !important;}”]Bituminous sheet<\/strong><\/p>\n\nPrefabricated sheets made up of one or several layers coated with mastic asphalt, encapsulated (P.AND. film), and non-stick on both sides. This can occasionally be supplied with weather-proof protection on one side.<\/p>\n
\n <\/p>\n
Mastic asphalt<\/strong><\/p>\nBitumen derived from the distillation of petroleum, modified with the addition of polymers (polymeric) or other processes (Oxyasphalt).<\/p>\n
\n <\/p>\n
Polymeric: APP \u2013 SBS<\/strong><\/p>\n\n- APP:<\/strong> Polymer (Atactic Polypropylene) which is added to bitumen to obtain Plastomeric sheets.<\/li>\n<\/ul>\n
PROPERTIES<\/strong>:<\/p>\n\n- High softening point: allows application on hot days.<\/li>\n
- Highly resistant to atmospheric agents: provides maximum guarantee of durability and strength.<\/li>\n
- Good flexibility at low temperatures. (-15o<\/sup> C).<\/li>\n<\/ul>\n
SBS<\/strong>: Polymer (Styrene Butadiene Styrene) which is added to the bitumen to obtain Elastomeric sheets.<\/p>\nPROPERTIES:<\/p>\n
\n- Excellent flexibility at low temperatures (-20o<\/sup> C).<\/li>\n
- Excellent adherence to most surfaces used in construction.<\/li>\n<\/ul>\n
CONSIDERATIONS<\/strong>:<\/p>\n\n- Normally APP or SBS polymeric bitumen sheets may be used indistinctly.<\/li>\n
- In hot climates the APP sheets provide easier application.<\/li>\n
- The penetration of SBS at 25o <\/sup>C is 40 mm, while that of APP is 30 mm.<\/li>\n
- Using sheets SBS sheets on roofs with oscillating movement (metallic roofs) or on roofs where adhesion to the surface is a priority (parking roofs) is recommended.<\/li>\n<\/ul>\n
Oxidized bitumen (Oxyasphalt)<\/strong><\/p>\nBitumen derived from the distillation of petroleum which has hardened and acquired reduced thermal susceptibility, through blowing with hot air with or without added catalysts.<\/p>\n
\n <\/p>\n
Armour<\/strong><\/p>\nMaterial incorporated into or onto sheets with the purpose of providing support to the waterproofing material and added mechanical characteristics such as:<\/p>\n
\n- Resistance to Puncturing.<\/li>\n
- Dimensional Stability.<\/li>\n
- Resistance to Tearing.<\/li>\n
- Elongation<\/li>\n<\/ul>\n\n
<\/p>\n
\n <\/p>\n
SINGLE SHEET (SINGLE LAYER):<\/strong><\/p>\nSheet membrane WATERPROOFING SYSTEMS based on the placement of a single bituminous polymer sheet (LBM).<\/p>\n
With a minimum weight of:<\/p>\n
\n- \u00a04kg\/m2 in unprotected solutions<\/li>\n
- \u00a05 kg\/m2 in auto-protected solutions<\/li>\n<\/ul>\n
Requirements in accordance with the Spanish CTE technical construction code.<\/p>\n
Single sheet systems, depending on their composition (mastic asphalt), armour or method of application, can be subdivided into the following systems:<\/p>\n
\n- Floating: 0,1,2-I.ILB<\/li>\n
- Adherent: 3,4-ILB<\/li>\n
- Self protecting: 5,6,7,8-ILB<\/li>\n
- Anti-root: 9,10,11,12-ILB<\/li>\n
- Mechanically fixed: 13-ILB<\/li>\n
- Self adhesive: 14-ILB<\/li>\n<\/ul>\n<\/div>\n\n
\n <\/p>\n
DOUBLE SHEET (DOUBLE COAT):<\/strong><\/p>\nLaminate WATERPROOFING SYSTEMS based on placement of a combination of two laminar bituminous sheets (LBM \/ LA \/ OXI), with a composition of not less than 4KG\/m2 of polymeric mastic asphalt (LBM), per m2 (completed with LA \/ OXI), in accordance with CTE regulations.<\/p>\n
The double sheet systems, depending on their combination, composition (mastic asphalt), armour or method of application, can be subdivided into the following systems:<\/p>\n
\n- Floating: 15,16-ILB<\/li>\n
- Adhesive: 17,18-ILB<\/li>\n
- Self protecting: 19,20,21,22-ILB<\/li>\n
- Anti-root: 23,24,25,26,27,28,29,30-ILB<\/li>\n
- Mechanically fixed: 31-ILB<\/li>\n<\/ul>\n
<\/p>\n<\/div>\n<\/div>\n
[\/vc_column_text][\/ultimate_exp_section][vc_empty_space height=”50px”]
<\/span>STAND OUT PROJECTS COMPLETED USING THESE SYSTEMS<\/span><\/div><\/div>[vc_empty_space][vc_media_grid element_width=”2″ grid_id=”vc_gid:1532767129573-c99378b3-f801-10″ include=”817,818,819,820,821,822,823,824,825,826,827,828,829,830,831,832,833,834,835,836″][\/vc_column][vc_column width=”1\/4″]\t\t[vc_column_text]- GARDEN AREA SYSTEMS<\/a><\/li>\n
- LAMINATED WATERPROOFING SYSTEMS<\/a>\n
\n\t- LAMINATED BITUMINOUS SYSTEMS (APP \u2013 SBS)<\/a><\/li>\n\t
- LAMINATED SYNTHETIC SYSTEMS<\/a><\/li>\n<\/ul>\n<\/li>\n
- CONTINUOUS WATERPROOFING SYSTEMS<\/a>\n
\n\t- POLYUREA<\/a><\/li>\n\t
- POLYURETHANES \u2013 PU<\/a><\/li>\n\t
- MODIFIED BITUMENS<\/a><\/li>\n<\/ul>\n<\/li>\n
- CEMENT BASED WATERPROOFING SYSTEMS<\/a>\n
\n\t- FLEXIBLE SYSTEMS<\/a><\/li>\n\t
- CRYSTALLIZING SYSTEMS<\/a><\/li>\n<\/ul>\n<\/li>\n
- INJECTED SYSTEMS<\/a>\n
\n\t- CONSOLIDANTS<\/a><\/li>\n\t
- LEAK SEALANTS<\/a><\/li>\n<\/ul>\n<\/li>\n
- PROTECTIVE COATINGS AND PAINTS<\/a>\n
\n\t- BITUMINOUS EMULSIONS<\/a><\/li>\n\t
- BITUMINOUS MORTARS<\/a><\/li>\n\t
- EPOXY TARS<\/a><\/li>\n\t
- PAINTS<\/a><\/li>\n<\/ul>\n<\/li>\n<\/ul><\/div><\/strong>[\/vc_column_text]\t\t<\/div><\/div>[\/vc_column][\/vc_row]<\/p>\n","protected":false},"excerpt":{"rendered":"
[vc_row type=”vc_default” full_width=”stretch_row” bg_type=”image” parallax_style=”vcpb-default” bg_image_new=”id^438|url^http:\/\/www.grupoiraco.com\/wp-content\/uploads\/2017\/02\/gotass.jpg|caption^null|alt^null|title^gotass|description^null” bg_image_repeat=”no-repeat” css=”.vc_custom_1486576121801{margin-top: -50px !important;}”][vc_column][vc_empty_space height=”250px”][\/vc_column][\/vc_row][vc_row][vc_column][\/vc_column][\/vc_row][vc_row][vc_column width=”3\/4″][vc_single_image image=”1260″ img_size=”full”][vc_column_text] LAMINATED BITUMINOUS SYSTEMS (APP \u2013 SBS) WATERPROOFING SYSTEMS based on the placement of a combination of bituminous sheets, which depending on their composition, armour, finish or… [+]<\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[107],"tags":[],"_links":{"self":[{"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/posts\/3452"}],"collection":[{"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/comments?post=3452"}],"version-history":[{"count":3,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/posts\/3452\/revisions"}],"predecessor-version":[{"id":3648,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/posts\/3452\/revisions\/3648"}],"wp:attachment":[{"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/media?parent=3452"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/categories?post=3452"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/tags?post=3452"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
GREEN ROOF<\/h6>\n<\/td>\n\nFLOATING<\/h6>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
<\/p>\n
<\/p>\n
<\/div>\n[\/vc_column_text][vc_separator][ultimate_exp_section title=”+ INFORMATION”][vc_column_text css=”.vc_custom_1532762481278{background-color: #ffffff !important;}”]Bituminous sheet<\/strong><\/p>\n\nPrefabricated sheets made up of one or several layers coated with mastic asphalt, encapsulated (P.AND. film), and non-stick on both sides. This can occasionally be supplied with weather-proof protection on one side.<\/p>\n
\n <\/p>\n
Mastic asphalt<\/strong><\/p>\nBitumen derived from the distillation of petroleum, modified with the addition of polymers (polymeric) or other processes (Oxyasphalt).<\/p>\n
\n <\/p>\n
Polymeric: APP \u2013 SBS<\/strong><\/p>\n\n- APP:<\/strong> Polymer (Atactic Polypropylene) which is added to bitumen to obtain Plastomeric sheets.<\/li>\n<\/ul>\n
PROPERTIES<\/strong>:<\/p>\n\n- High softening point: allows application on hot days.<\/li>\n
- Highly resistant to atmospheric agents: provides maximum guarantee of durability and strength.<\/li>\n
- Good flexibility at low temperatures. (-15o<\/sup> C).<\/li>\n<\/ul>\n
SBS<\/strong>: Polymer (Styrene Butadiene Styrene) which is added to the bitumen to obtain Elastomeric sheets.<\/p>\nPROPERTIES:<\/p>\n
\n- Excellent flexibility at low temperatures (-20o<\/sup> C).<\/li>\n
- Excellent adherence to most surfaces used in construction.<\/li>\n<\/ul>\n
CONSIDERATIONS<\/strong>:<\/p>\n\n- Normally APP or SBS polymeric bitumen sheets may be used indistinctly.<\/li>\n
- In hot climates the APP sheets provide easier application.<\/li>\n
- The penetration of SBS at 25o <\/sup>C is 40 mm, while that of APP is 30 mm.<\/li>\n
- Using sheets SBS sheets on roofs with oscillating movement (metallic roofs) or on roofs where adhesion to the surface is a priority (parking roofs) is recommended.<\/li>\n<\/ul>\n
Oxidized bitumen (Oxyasphalt)<\/strong><\/p>\nBitumen derived from the distillation of petroleum which has hardened and acquired reduced thermal susceptibility, through blowing with hot air with or without added catalysts.<\/p>\n
\n <\/p>\n
Armour<\/strong><\/p>\nMaterial incorporated into or onto sheets with the purpose of providing support to the waterproofing material and added mechanical characteristics such as:<\/p>\n
\n- Resistance to Puncturing.<\/li>\n
- Dimensional Stability.<\/li>\n
- Resistance to Tearing.<\/li>\n
- Elongation<\/li>\n<\/ul>\n\n
<\/p>\n
\n <\/p>\n
SINGLE SHEET (SINGLE LAYER):<\/strong><\/p>\nSheet membrane WATERPROOFING SYSTEMS based on the placement of a single bituminous polymer sheet (LBM).<\/p>\n
With a minimum weight of:<\/p>\n
\n- \u00a04kg\/m2 in unprotected solutions<\/li>\n
- \u00a05 kg\/m2 in auto-protected solutions<\/li>\n<\/ul>\n
Requirements in accordance with the Spanish CTE technical construction code.<\/p>\n
Single sheet systems, depending on their composition (mastic asphalt), armour or method of application, can be subdivided into the following systems:<\/p>\n
\n- Floating: 0,1,2-I.ILB<\/li>\n
- Adherent: 3,4-ILB<\/li>\n
- Self protecting: 5,6,7,8-ILB<\/li>\n
- Anti-root: 9,10,11,12-ILB<\/li>\n
- Mechanically fixed: 13-ILB<\/li>\n
- Self adhesive: 14-ILB<\/li>\n<\/ul>\n<\/div>\n\n
\n <\/p>\n
DOUBLE SHEET (DOUBLE COAT):<\/strong><\/p>\nLaminate WATERPROOFING SYSTEMS based on placement of a combination of two laminar bituminous sheets (LBM \/ LA \/ OXI), with a composition of not less than 4KG\/m2 of polymeric mastic asphalt (LBM), per m2 (completed with LA \/ OXI), in accordance with CTE regulations.<\/p>\n
The double sheet systems, depending on their combination, composition (mastic asphalt), armour or method of application, can be subdivided into the following systems:<\/p>\n
\n- Floating: 15,16-ILB<\/li>\n
- Adhesive: 17,18-ILB<\/li>\n
- Self protecting: 19,20,21,22-ILB<\/li>\n
- Anti-root: 23,24,25,26,27,28,29,30-ILB<\/li>\n
- Mechanically fixed: 31-ILB<\/li>\n<\/ul>\n
<\/p>\n<\/div>\n<\/div>\n
[\/vc_column_text][\/ultimate_exp_section][vc_empty_space height=”50px”]
<\/span>STAND OUT PROJECTS COMPLETED USING THESE SYSTEMS<\/span><\/div><\/div>[vc_empty_space][vc_media_grid element_width=”2″ grid_id=”vc_gid:1532767129573-c99378b3-f801-10″ include=”817,818,819,820,821,822,823,824,825,826,827,828,829,830,831,832,833,834,835,836″][\/vc_column][vc_column width=”1\/4″]\t\t[vc_column_text]- GARDEN AREA SYSTEMS<\/a><\/li>\n
- LAMINATED WATERPROOFING SYSTEMS<\/a>\n
\n\t- LAMINATED BITUMINOUS SYSTEMS (APP \u2013 SBS)<\/a><\/li>\n\t
- LAMINATED SYNTHETIC SYSTEMS<\/a><\/li>\n<\/ul>\n<\/li>\n
- CONTINUOUS WATERPROOFING SYSTEMS<\/a>\n
\n\t- POLYUREA<\/a><\/li>\n\t
- POLYURETHANES \u2013 PU<\/a><\/li>\n\t
- MODIFIED BITUMENS<\/a><\/li>\n<\/ul>\n<\/li>\n
- CEMENT BASED WATERPROOFING SYSTEMS<\/a>\n
\n\t- FLEXIBLE SYSTEMS<\/a><\/li>\n\t
- CRYSTALLIZING SYSTEMS<\/a><\/li>\n<\/ul>\n<\/li>\n
- INJECTED SYSTEMS<\/a>\n
\n\t- CONSOLIDANTS<\/a><\/li>\n\t
- LEAK SEALANTS<\/a><\/li>\n<\/ul>\n<\/li>\n
- PROTECTIVE COATINGS AND PAINTS<\/a>\n
\n\t- BITUMINOUS EMULSIONS<\/a><\/li>\n\t
- BITUMINOUS MORTARS<\/a><\/li>\n\t
- EPOXY TARS<\/a><\/li>\n\t
- PAINTS<\/a><\/li>\n<\/ul>\n<\/li>\n<\/ul><\/div><\/strong>[\/vc_column_text]\t\t<\/div><\/div>[\/vc_column][\/vc_row]<\/p>\n","protected":false},"excerpt":{"rendered":"
[vc_row type=”vc_default” full_width=”stretch_row” bg_type=”image” parallax_style=”vcpb-default” bg_image_new=”id^438|url^http:\/\/www.grupoiraco.com\/wp-content\/uploads\/2017\/02\/gotass.jpg|caption^null|alt^null|title^gotass|description^null” bg_image_repeat=”no-repeat” css=”.vc_custom_1486576121801{margin-top: -50px !important;}”][vc_column][vc_empty_space height=”250px”][\/vc_column][\/vc_row][vc_row][vc_column][\/vc_column][\/vc_row][vc_row][vc_column width=”3\/4″][vc_single_image image=”1260″ img_size=”full”][vc_column_text] LAMINATED BITUMINOUS SYSTEMS (APP \u2013 SBS) WATERPROOFING SYSTEMS based on the placement of a combination of bituminous sheets, which depending on their composition, armour, finish or… [+]<\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[107],"tags":[],"_links":{"self":[{"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/posts\/3452"}],"collection":[{"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/comments?post=3452"}],"version-history":[{"count":3,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/posts\/3452\/revisions"}],"predecessor-version":[{"id":3648,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/posts\/3452\/revisions\/3648"}],"wp:attachment":[{"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/media?parent=3452"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/categories?post=3452"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/tags?post=3452"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
FLOATING<\/h6>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
<\/p>\n
<\/p>\n
[\/vc_column_text][vc_separator][ultimate_exp_section title=”+ INFORMATION”][vc_column_text css=”.vc_custom_1532762481278{background-color: #ffffff !important;}”]Bituminous sheet<\/strong><\/p>\n Prefabricated sheets made up of one or several layers coated with mastic asphalt, encapsulated (P.AND. film), and non-stick on both sides. This can occasionally be supplied with weather-proof protection on one side.<\/p>\n <\/p>\n Mastic asphalt<\/strong><\/p>\n Bitumen derived from the distillation of petroleum, modified with the addition of polymers (polymeric) or other processes (Oxyasphalt).<\/p>\n <\/p>\n Polymeric: APP \u2013 SBS<\/strong><\/p>\n PROPERTIES<\/strong>:<\/p>\n SBS<\/strong>: Polymer (Styrene Butadiene Styrene) which is added to the bitumen to obtain Elastomeric sheets.<\/p>\n PROPERTIES:<\/p>\n CONSIDERATIONS<\/strong>:<\/p>\n Oxidized bitumen (Oxyasphalt)<\/strong><\/p>\n Bitumen derived from the distillation of petroleum which has hardened and acquired reduced thermal susceptibility, through blowing with hot air with or without added catalysts.<\/p>\n <\/p>\n Armour<\/strong><\/p>\n Material incorporated into or onto sheets with the purpose of providing support to the waterproofing material and added mechanical characteristics such as:<\/p>\n <\/p>\n <\/p>\n SINGLE SHEET (SINGLE LAYER):<\/strong><\/p>\n Sheet membrane WATERPROOFING SYSTEMS based on the placement of a single bituminous polymer sheet (LBM).<\/p>\n With a minimum weight of:<\/p>\n Requirements in accordance with the Spanish CTE technical construction code.<\/p>\n Single sheet systems, depending on their composition (mastic asphalt), armour or method of application, can be subdivided into the following systems:<\/p>\n <\/p>\n DOUBLE SHEET (DOUBLE COAT):<\/strong><\/p>\n Laminate WATERPROOFING SYSTEMS based on placement of a combination of two laminar bituminous sheets (LBM \/ LA \/ OXI), with a composition of not less than 4KG\/m2 of polymeric mastic asphalt (LBM), per m2 (completed with LA \/ OXI), in accordance with CTE regulations.<\/p>\n The double sheet systems, depending on their combination, composition (mastic asphalt), armour or method of application, can be subdivided into the following systems:<\/p>\n <\/p>\n<\/div>\n<\/div>\n [\/vc_column_text][\/ultimate_exp_section][vc_empty_space height=”50px”] [vc_row type=”vc_default” full_width=”stretch_row” bg_type=”image” parallax_style=”vcpb-default” bg_image_new=”id^438|url^http:\/\/www.grupoiraco.com\/wp-content\/uploads\/2017\/02\/gotass.jpg|caption^null|alt^null|title^gotass|description^null” bg_image_repeat=”no-repeat” css=”.vc_custom_1486576121801{margin-top: -50px !important;}”][vc_column][vc_empty_space height=”250px”][\/vc_column][\/vc_row][vc_row][vc_column][\/vc_column][\/vc_row][vc_row][vc_column width=”3\/4″][vc_single_image image=”1260″ img_size=”full”][vc_column_text] LAMINATED BITUMINOUS SYSTEMS (APP \u2013 SBS) WATERPROOFING SYSTEMS based on the placement of a combination of bituminous sheets, which depending on their composition, armour, finish or… [+]<\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[107],"tags":[],"_links":{"self":[{"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/posts\/3452"}],"collection":[{"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/comments?post=3452"}],"version-history":[{"count":3,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/posts\/3452\/revisions"}],"predecessor-version":[{"id":3648,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/posts\/3452\/revisions\/3648"}],"wp:attachment":[{"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/media?parent=3452"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/categories?post=3452"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/tags?post=3452"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
\n
\n\n
\n
\n
\n
\n\n
\n\n
\n
\n\n
\n\t
\n\t
\n\t
\n\t
\n\t