![\"\"](\"http:\/\/www.grupoiraco.com\/wp-content\/uploads\/2017\/02\/isolpro_thermic.jpg\")
<\/h2>\nTHERMAL INSULATION SYSTEMS<\/h2>\n\nThe aim is to thermally insulate the materials or systems to prevent the transfer of heat\/cold via conduction. This is assessed in terms of thermal resistance, expressed in m\u00b2.K\/W (square metre and Kelvin\/Watt).<\/p>\n
A material is considered thermally insulating when its thermal conductivity coefficient is less than \u03bb<0.10 W\/m2K measured at 20 \u00b0C (obligatory) (previously: 0.085 kcal \/ m2.\u00b0C)<\/p>\n
The passage of heat depends on the resistance provided by the materials.<\/p>\n
Classification of thermal insulation:<\/p>\n
\n\n- Mineral wools; rock wool and glass wool<\/li>\n
- Plastic foam derived from petroleum:\n
\n- Expanded polystyrene \u2013 EPS<\/li>\n
- Extruded Polystyrene \u2013 XPS<\/li>\n
- Expanded Polyethylene<\/li>\n
- Expanded Polyurethane<\/li>\n
- PUR<\/li>\n<\/ul>\n<\/li>\n
- Recycled products; such as cellulosic insulation made from used paper and sheep\u2019s wool<\/li>\n
- Vegetable based materials; straw or bundles of straw, wood chips, natural cork, etc.<\/li>\n<\/ul>\n
The thermal conductivity between the materials used in construction tends to be similar. As a result this is not the main consideration for their selection. The difference revolves around their physical-chemical characteristics.<\/p>\n
Factors to be assessed:<\/p>\n
\n- Contraction \/ Dilation of the insulation material<\/li>\n
- Fire resistance<\/li>\n
- Action against solvents and atmospheric agents<\/li>\n
- Mechanical requirements<\/li>\n<\/ul>\n<\/div>\n<\/div>\n
[\/vc_column_text][vc_empty_space height=”30px”][vc_column_text]<\/p>\n
THERMAL INSULATION SYSTEMS<\/h3>\n
[\/vc_column_text]
\t\t[vc_column_text]POLYSTYRENE<\/strong><\/p>\n\n- EXTRUDED \u2013 XPS (1-A.TE.. 7-A.TE)<\/li>\n
- EXPANDED \u2013 EPS (8-A.TE, 9-A.TE)<\/li>\n<\/ul>\n
[\/vc_column_text]\t\t<\/div><\/div>
\t\t[vc_column_text]MINERAL WOOLS<\/strong><\/p>\n\n- ROCK WOOLS (10-A.TE, 16-A.TE)<\/li>\n
- GLASS WOOLS (17-A.TE, 18-A.TE)<\/li>\n<\/ul>\n
[\/vc_column_text]\t\t<\/div><\/div>
\t\t[vc_column_text]REFLEXIVE INSULATING SHEETS<\/strong><\/p>\n\n- AIR BUR TERMIC (19-A.TE)<\/li>\n<\/ul>\n
[\/vc_column_text]\t\t<\/div><\/div>
\t\t[vc_column_text]RIGID POLYISOCYANURATE PANELS \u2013 PIR<\/strong><\/p>\n\n- AISLADECK (20-A.TE, 22-A.TE)<\/li>\n<\/ul>\n
[\/vc_column_text]\t\t<\/div><\/div>
\t\t[vc_column_text]PROJECTED POLYURETHANE FOAM<\/strong><\/p>\n\n- PU (23-A.TE)<\/li>\n<\/ul>\n
[\/vc_column_text]\t\t<\/div><\/div>[\/vc_column][vc_column width=”1\/4″]
\t\t[vc_column_text]- INSULATIONS<\/a>\n
\n\t- THERMAL INSULATION SYSTEMS<\/a><\/li>\n\t
- ACOUSTIC INSULATION SYSTEMS<\/a><\/li>\n<\/ul>\n<\/li>\n<\/ul><\/div><\/strong>[\/vc_column_text]\t\t<\/div><\/div>[\/vc_column][\/vc_row]<\/p>\n","protected":false},"excerpt":{"rendered":"
[vc_row type=”vc_default” full_width=”stretch_row” bg_type=”image” parallax_style=”vcpb-default” bg_image_new=”id^1349|url^http:\/\/www.grupoiraco.com\/wp-content\/uploads\/2017\/02\/thermografia.jpg|caption^null|alt^null|title^thermografia|description^null” bg_image_repeat=”no-repeat” bg_image_posiiton=”0px 0px” css=”.vc_custom_1488304960823{margin-top: -50px !important;}”][vc_column][vc_empty_space height=”250px”][\/vc_column][\/vc_row][vc_row][vc_column][\/vc_column][\/vc_row][vc_row][vc_column width=”3\/4″][vc_column_text] THERMAL INSULATION SYSTEMS The aim is to thermally insulate the materials or systems to prevent the transfer of heat\/cold via conduction. This is assessed in terms… [+]<\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[100,102],"tags":[],"_links":{"self":[{"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/posts\/3391"}],"collection":[{"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/comments?post=3391"}],"version-history":[{"count":3,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/posts\/3391\/revisions"}],"predecessor-version":[{"id":3659,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/posts\/3391\/revisions\/3659"}],"wp:attachment":[{"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/media?parent=3391"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/categories?post=3391"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/tags?post=3391"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
The aim is to thermally insulate the materials or systems to prevent the transfer of heat\/cold via conduction. This is assessed in terms of thermal resistance, expressed in m\u00b2.K\/W (square metre and Kelvin\/Watt).<\/p>\n
A material is considered thermally insulating when its thermal conductivity coefficient is less than \u03bb<0.10 W\/m2K measured at 20 \u00b0C (obligatory) (previously: 0.085 kcal \/ m2.\u00b0C)<\/p>\n
The passage of heat depends on the resistance provided by the materials.<\/p>\n
Classification of thermal insulation:<\/p>\n
- \n
- Mineral wools; rock wool and glass wool<\/li>\n
- Plastic foam derived from petroleum:\n
- \n
- Expanded polystyrene \u2013 EPS<\/li>\n
- Extruded Polystyrene \u2013 XPS<\/li>\n
- Expanded Polyethylene<\/li>\n
- Expanded Polyurethane<\/li>\n
- PUR<\/li>\n<\/ul>\n<\/li>\n
- Recycled products; such as cellulosic insulation made from used paper and sheep\u2019s wool<\/li>\n
- Vegetable based materials; straw or bundles of straw, wood chips, natural cork, etc.<\/li>\n<\/ul>\n
The thermal conductivity between the materials used in construction tends to be similar. As a result this is not the main consideration for their selection. The difference revolves around their physical-chemical characteristics.<\/p>\n
Factors to be assessed:<\/p>\n
- \n
- Contraction \/ Dilation of the insulation material<\/li>\n
- Fire resistance<\/li>\n
- Action against solvents and atmospheric agents<\/li>\n
- Mechanical requirements<\/li>\n<\/ul>\n<\/div>\n<\/div>\n
[\/vc_column_text][vc_empty_space height=”30px”][vc_column_text]<\/p>\n
THERMAL INSULATION SYSTEMS<\/h3>\n
[\/vc_column_text]
\t\t[vc_column_text]POLYSTYRENE<\/strong><\/p>\n- \n
- EXTRUDED \u2013 XPS (1-A.TE.. 7-A.TE)<\/li>\n
- EXPANDED \u2013 EPS (8-A.TE, 9-A.TE)<\/li>\n<\/ul>\n
[\/vc_column_text]\t\t<\/div><\/div>
\t\t[vc_column_text]MINERAL WOOLS<\/strong><\/p>\n- \n
- ROCK WOOLS (10-A.TE, 16-A.TE)<\/li>\n
- GLASS WOOLS (17-A.TE, 18-A.TE)<\/li>\n<\/ul>\n
[\/vc_column_text]\t\t<\/div><\/div>
\t\t[vc_column_text]REFLEXIVE INSULATING SHEETS<\/strong><\/p>\n- \n
- AIR BUR TERMIC (19-A.TE)<\/li>\n<\/ul>\n
[\/vc_column_text]\t\t<\/div><\/div>
\t\t[vc_column_text]RIGID POLYISOCYANURATE PANELS \u2013 PIR<\/strong><\/p>\n- \n
- AISLADECK (20-A.TE, 22-A.TE)<\/li>\n<\/ul>\n
[\/vc_column_text]\t\t<\/div><\/div>
\t\t[vc_column_text]PROJECTED POLYURETHANE FOAM<\/strong><\/p>\n- \n
- PU (23-A.TE)<\/li>\n<\/ul>\n
[\/vc_column_text]\t\t<\/div><\/div>[\/vc_column][vc_column width=”1\/4″]
\t\t[vc_column_text]- INSULATIONS<\/a>\n
- \n\t
- THERMAL INSULATION SYSTEMS<\/a><\/li>\n\t
- ACOUSTIC INSULATION SYSTEMS<\/a><\/li>\n<\/ul>\n<\/li>\n<\/ul><\/div><\/strong>[\/vc_column_text]\t\t<\/div><\/div>[\/vc_column][\/vc_row]<\/p>\n","protected":false},"excerpt":{"rendered":"
[vc_row type=”vc_default” full_width=”stretch_row” bg_type=”image” parallax_style=”vcpb-default” bg_image_new=”id^1349|url^http:\/\/www.grupoiraco.com\/wp-content\/uploads\/2017\/02\/thermografia.jpg|caption^null|alt^null|title^thermografia|description^null” bg_image_repeat=”no-repeat” bg_image_posiiton=”0px 0px” css=”.vc_custom_1488304960823{margin-top: -50px !important;}”][vc_column][vc_empty_space height=”250px”][\/vc_column][\/vc_row][vc_row][vc_column][\/vc_column][\/vc_row][vc_row][vc_column width=”3\/4″][vc_column_text] THERMAL INSULATION SYSTEMS The aim is to thermally insulate the materials or systems to prevent the transfer of heat\/cold via conduction. This is assessed in terms… [+]<\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[100,102],"tags":[],"_links":{"self":[{"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/posts\/3391"}],"collection":[{"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/comments?post=3391"}],"version-history":[{"count":3,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/posts\/3391\/revisions"}],"predecessor-version":[{"id":3659,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/posts\/3391\/revisions\/3659"}],"wp:attachment":[{"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/media?parent=3391"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/categories?post=3391"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.grupoiraco.com\/en\/wp-json\/wp\/v2\/tags?post=3391"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
- ACOUSTIC INSULATION SYSTEMS<\/a><\/li>\n<\/ul>\n<\/li>\n<\/ul><\/div><\/strong>[\/vc_column_text]\t\t<\/div><\/div>[\/vc_column][\/vc_row]<\/p>\n","protected":false},"excerpt":{"rendered":"
- THERMAL INSULATION SYSTEMS<\/a><\/li>\n\t
- INSULATIONS<\/a>\n
- PU (23-A.TE)<\/li>\n<\/ul>\n
- AISLADECK (20-A.TE, 22-A.TE)<\/li>\n<\/ul>\n
- AIR BUR TERMIC (19-A.TE)<\/li>\n<\/ul>\n